Y06 TWS Hearing Aid

1)Product Overview: TWS True Wireless Hearing Aids – Compact, lightweight, and easy to wear, combining convenience with a modern, stylish design. 16-Channel Digital Hearing Chip – Professional-grade performance with an average gain exceeding 34 dB. AI Intelligent Sound Processing – Built-in algorithms include speech enhancement, feedback (howling) detection, echo cancellation, automatic gain control (AGC), and transient noise suppression. Supports a 64-band EQ equalizer for precise sound customization. Premium Audio Components – Equipped with professional silicon microphones and high-quality full-range balanced armature drivers, delivering clear sound across a 200 Hz – 7500 Hz frequency range. Extended Battery Life (Earbuds) – Each hearing aid features a high-capacity 40 mAh cobalt lithium battery, providing over 20 hours of continuous use on a single charge. Charging Case Support – 280 mAh charging case supports up to 3 full recharges, offering a total battery life of over 60 hours. Fully Certified – Certified with China NMPA Class II Medical Device Registration, US FDA Class I, FCC, CE, RoHS, and SCCP certifications. ----- 2)Technical Specifications: Frequency Response: 200 Hz – 7500 Hz Equivalent Input Noise (EIN): ≤ 15 dB ± 3 dB Total Harmonic Distortion (THD): ≤ 1.5% Max OSPL90 @ 2900 Hz: ≤ 113 dB ± 4 dB HFA Avg OSPL90: 108 dB ± 4 dB Full-On Gain (FOG50) Max @ 2900 Hz: 40 dB ± 4 dB Average Gain (FOG50 HFA Avg): 35 ± 4 dB Rated Current Consumption: 1.7 mA ----- 3)Battery & Charging: Hearing Aid Battery: Lithium-ion (cobalt-based), 40 mAh × 2 (with protection board) Charging Case Battery: Lithium-ion, 280 mAh (with protection board) Charging Voltage (Case): DC 5V Charging Current: ≤ 300 mA Battery Cycle Life: ≥ 400 cycles Single Use Time: ≥ 20 hours Total Usage Time (with Case): ≥ 60 hours Charging Time (Case): ≤ 1.5 hours Charging Port: USB Type-C HOW TO USE 1.put the hearing aid in your ears； 2.Press the touch panel for 3 Seconds, turn on the hearing aid； 3.Chose a working mode in which the voice is perfectly clear by pressing the touch panel and keep for 2S. 4.Adjust the volume to the most comfortable level by pressing the touch panel once. 5.Power Off: Place the hearing aid in the charging case, and it will automatically shut down and begin charging. Operational Guidelines 1.The hearing aid has five levels of volume, which can be switched on and off by clicking on the touch area. When you increase the volume to the maximum, you hear a longer“Drop” sound. Touch it again, switch to the minimum volume, and you hear three shorter“Drop” sounds. Continue to gently touch the area, gradually increasing the volume, in turn cycle； 2. This hearing aid supports four working modes, through pressing the touch area twice can be mode cyclic switch, boot default mode is "Full-band amplification mode". Press the touch area and keep for 2S, there are 2"Drop" sound, switch to mode 2"High frequency amplification mode". Continue to press the touch area and keep for 2S, there are 3“Drop” sound, switch to mode “Intermediate frequency amplification mode”. Continue to press the touch area and keep for 2S, there are 4“Drop” sound, switch to mode 4“Low-frequency amplification mode”. Continue to press the touch area and keep for 2S , there are a“Drop” sound, back to the mode of “Full-band amplification mode”, in turn cycle. Users can choose the best hearing aid mode according to their actual hearing condition.